15kV 600A Deadbreak Bushing

15kV 600A Deadbreak Bushing is used to convert a standard 600A deadbreak interface to a standard 200A loadbreak interface. Used with a 200A insulated protective cap, M.O.V Elbow Arrester, Grounding Elbow or Loadbreak Elbow Connctor, A integral deadbreak bushing provides a fully shielded. lt will be T-lI connctor if connect with T connector.

Scope of Delivery

lntegral Deadbreak Bushing

Two-head Screw

Hex Wrench

Clearing Paper

Silicone Lubricant

Covering cap

lnstallation Instruction Sheet

Quality Certificate

Inference Information

Product Structure information

1. Arc-extinguishing chamber: It can effectively eliminate the impact of arc on the product during the plug-in and pull-out operation of the cable joint.

2. Outer semi-conductive layer: Prefabricated EPDM conductive rubber complies with IEEE592 standard.

3. Insulation layer: The unique formula and mixing technology ensure the high quality of prefabricated EPDM insulating rubber.

4. Copper connector: Copper connector treated with special technology.

5. Ground eye: Ground the product through the ground eye.

6. Hexagon socket: Used in conjunction with the hexagon socket wrench for easy operation.